| An
Example: If a reading of
irrigation water has a value of .2 mmhos and a
value of 1.0 mmhos is obtained from the
fertilizer-injected water using 20-20-20, the
corrected value would be 1.0 - .2 = .80. A look
at the chart indicates a value of .82 for
20-20-20 being injected at 200 PPM. With an
allowance of + or - 10% this is well within
range.
To convert millimhos (mmhos) to
micromhos (umhos) multiply by 1000.
The values on this chart were
obtained under laboratory conditions using
distilled water. The values obtained by the
grower under field conditions could therefore,
vary slightly (+10%) from values
listed here.
This chart is to be used with
Plant Marvel's Nutriculture formulations. Other
brands may be composed of different raw materials
which would give different values, even though
they are the same analysis.
Copyright 1998 PML, Inc.
|